Flashlight Ring (Picatinny Base)*
The Trinity Force three bolt flashlight ring with picatinny mounting base was designed to fit most 1 inch tubed flashlights and will work a variety of brands. NOTE: this clamp must be completely dismantled before installing on a Mil-Std 1913 rail in order to properly fit.
For your safety, Trinity Force recommends this part be installed by a competent, qualified gunsmith/installer with an understanding of the weapon platform that the part is being installed on. Always make sure the firearm is unloaded and pointed in a safe direction when working.
| ADDITIONAL INFORMATION | |
| Weight (oz) | 1.7 |
|---|---|
| Width (in) | 1.2 |
| Length (in) | 1.65 |
| Material | Aircraft Grade Aluminum |
| Coating Type | Hard Coat Anodized Finish |
| Color | Black |
| *Note: It’s up to the customer to know your state’s law when ordering parts.
PRICE: $15.00 |
.750 Steel Micro Gas Block*
Low Profile Steel Gas Block fits all M4 Carbines and M16A2 – A3 and A4 rifles with .750 barrels. Replaces front sight and requires 10″ or longer free float handguard for enhanced reliability.
For your safety, Trinity Force recommends this part be installed by a competent, qualified gunsmith/installer with an understanding of the weapon platform that the part is being installed on. Always make sure the firearm is unloaded and pointed in a safe direction when working.
| ADDITIONAL INFORMATION | |
| Weight (oz) | 1.7 |
|---|---|
| Width (in) | 1.2 |
| Length (in) | 1.65 |
| Material | Aircraft Grade Aluminum |
| Coating Type | Hard Coat Anodized Finish |
| Color | Black |
| *Note: It’s up to the customer to know your state’s law when ordering parts.
PRICE: $18.00 |
.936 Steel Micro Gas Block*
Low Profile Steel Gas Block fits all AR 15 and LR 308 rifles with .936 barrels.Replaces front sight and requires 10-Inch or longer free float handguard for enhanced reliability.
For your safety, Trinity Force recommends this part be installed by a competent, qualified gunsmith/installer with an understanding of the weapon platform that the part is being installed on. Always make sure the firearm is unloaded and pointed in a safe direction when working.
| ADDITIONAL INFORMATION | |
| Weight (oz) | 2.1 |
|---|---|
| Width (in) | 1.2 |
| Length (in) | 1.5 |
| Material | High Strength Steel |
| Color | Black |
| *Note: It’s up to the customer to know your state’s law when ordering parts.
PRICE: $18.00 |
Extended Charging Handle Latch*
Oversized for quick access from all shooting positions. Allows quick, easy operation with left hand. Makes the charging handle easier to find and operate, especially on scope-mounted flat top receivers. Great for three gun shooters; expedites reloads and immediate action drills. Works on all AR-15/M16-type rifles including the AR-10 and SR-25. Easy, no-gunsmithing installation.
For your safety, Trinity Force recommends this part be installed by a competent, qualified gunsmith/installer with an understanding of the weapon platform that the part is being installed on. Always make sure the firearm is unloaded and pointed in a safe direction when working.
| ADDITIONAL INFORMATION | |
| Weight (oz) | 0.63 |
|---|---|
| Width (in) | 0.67 |
| Length (in) | 2.47 |
| Material | High Strength Steel |
| Color | Black |
| *Note: It’s up to the customer to know your state’s law when ordering parts.
PRICE: $10.00 |
Ambi Sling Mount*
The Ambi Sling Mount can be installed on any MIL-STD 1913 rail interface system. The dual point mount can be used for ergonomic positioning of the rifle’s forend sling contact point, and accepts both QD and hook style sling contact points.
The Trinity Force Ambi Sling Mount is designed to attach to any standard MIL-STD 1913 rail system, and fits securely using the locking cross bolt and clamp system. To install the mount, loosen the cross bolt nut until the clamp clears the rail section.Re-tighten the cross bolt nut to secure the mount to the rail.
| *Note: It’s up to the customer to know your state’s law when ordering parts.
PRICE: $25.00 |